One of the most important services to our customers is the diverse range of different materials, the performance characteristics exhibited by each, and processing customer-specific and custom designed products.
Adhesive tapes
Pressure Sensitive Adhesives (PSA), double and single–sided, acrylate, rubber or silicone based, carrier-free transfer adhesive or with carrier material, such as foam, non-wovens, foil or fabric.
Medical: Functional products for In Vitro Diagnostics (IVD), cosmetics, wound care and disposables.
Breathable PU film
Moisture-regulating germ barrier for wound care products.
Cellular materials
Cellular rubber and foam rubber, Polyethylene (XLPE), Polyimide (PI), Ethylene Propylene Diene Monomer (EPDM), Polyvinyl Chloride (PVC) and Polyurethane (PU) foams, silicone foam, blended cellular sponge/rubber formulations.
Composite materials
Multi-layer insulation material, polyester film, non-woven polyester or chipboard combinations, chipboard-PET-chipboard.
Elastomers & rubber
Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene Rubber (NBR, Buna-N), Natural Rubber (NR), Styrene-Butadiene Rubber (SBR), Neoprene Rubber (CR), Fluoroelastomers (FKM), Silicone (Viton), Masticated Rubber.
EMI/RFI shielding material
BOYD LECTROSHIELD - Fabric-Over-Foam (FOF), gasket material, electrically conductive adhesive tape and coated polyester fabric.
BOYD LECTROSHIELD - Conductive Foams
BOYD LECTROSHIELD - EMI Absorbers
Fabric/fibre materials
Filter materials, reticulated foam, non-wovens, felts.
Non-woven: Inexpensive, disposable product with absorbent properties.
Silver fabrics: Germicidal, anti-microbial effect in wound care and cosmetic products.
Heat-conducting material
TransTherm silicone and silicone free insulating foil, gap fillers, phase change material and adhesive tapes; flexible graphite solutions.
High-pressure gasket material
Non-asbestos fibre
Graphite
Aramid fibers with a nitrile binder
Hydrogels & Hydrocolloids
Skin-friendly adhesive for stoma products or electrodes.
Hydrophilic Polyurethane (PU) Foam
Wound care products for the optimizing of the wound environment.
O-Ring materials
For more information on the various O-Ring compounds visit our O-Rings website here.
Thermoplastics
Plastics and foils, such as: Acrylonitrile Butadiene Styrene (ABS), Hard Polyvinyl Chloride (HPVC), Polyethylene (PE), Polycarbonate (PC), Polyamide (PA), Polyethylene Terephthalate (PET), Polymethyl Methacrylate (PMMA), Polyoxymethylene (POM), Polypropylene (PP), Polystyrene (PS), Polytetrafluoroethylene (PTFE), Polyurethane (PU), Polyimide (PI), Polyether Ether Ketone (PEEK), Polyethylene Naphthalate (PEN).
Thermosetting plastics
Phenolic resin paper laminate, fabric-base laminate, polyester glass mat, vulcanized fibre.
